Completing HA Pair Association
The two appliances in an HA Pair must be associated on
MySonicWall. Once they are associated, the Secondary
appliance automatically shares the Security Services licenses of
the Primary appliance.
If the Secondary appliance has not yet been registered, follow
the steps listed in Registering in SonicOS on page 27 or
Registering on MySonicWall on page 28 to register it. This is
necessary to make it available for HA association with the
Primary.
To associate two SonicWall appliances on MySonicWall:
1 Log into your MySonicWall account.
2 Click My Products.
3 On the My Products page, click the product Name or
Serial Number of the appliance that you want to use as
the Primary appliance.
4 On the Service Management page, scroll down to the
Associated Products section.
5 Under Associated Products, click HA Secondary.
6 On the My Product ‐ Associated Products page, select
the appliance that you want to associate as the
46
SonicWall SuperMassive 9200/9400/9600 Getting Started Guide
Secondary appliance from the Serial Number drop‐
down list.
7 Click Associate.
8 Log into the SonicOS management interface of the
Primary appliance using the unique IP address assigned
on the High Availability > Monitoring page.
9 Navigate to the System > Licenses page and click the
Synchronize Licenses button. This allows the unit to
synchronize with the SonicWall license server.
10 Log into the SonicOS management interface of the
Secondary appliance using its unique IP address.
11 Navigate to the System > Licenses page and click the
Synchronize Licenses button. This ensures license
synchronization and sharing between the Primary and
Secondary appliances.
This completes the HA association on MySonicWall and
ensures that both appliances can share licenses.
Verifying High Availability Setup
Once you have configured the HA settings on the Primary
SonicWall appliance, log into the Primary appliance's unique
LAN/WAN IP address. Note that the management interface