Mounting And Removing A Deflector - Stihl FSA 130 R Instruction Manual

English
11.3.2 Removing the Barrier Bar
To remove the barrier bar:
► Switch off the power tool, @ 15.2.
► Remove the connecting cord, @ 14.2.
3
5
6
► Remove the screws (6).
► Remove the barrier bar (1), loop handle (3) and clamps (4
and 5).
► Remove the square nuts (2) from the loop handle.

11.4 Mounting and Removing a Deflector

11.4.1 Mounting a Deflector
WARNING
To reduce the risk of injury from thrown objects or contact
with the cutting attachment, never operate the trimmer /
brushcutter without a properly mounted deflector. Keep
bystanders at least 50 ft. (15 m) away. When using a
deflector designed for use with a metal cutting blade, you
must change the deflector or add a skirt before mounting a
mowing head.
28
1
2
4
11 Assembling the Trimmer / Brushcutter
WARNING
The cutting attachment and deflector must be an approved
combination. Use only an approved combination of cutting
attachment and deflector to maximize cutting performance
and reduce the risk of serious personal injury from thrown
objects or contact with the cutting attachment, @ 25.
All deflectors are mounted to the gearbox in the same way.
To mount a deflector:
► Switch off the power tool, @ 15.2.
► Remove the connecting cord, @ 14.2.
2
► Push the deflector (1) into the guides on the gearbox until
it stops. The deflector must be tight against the gearbox.
► Insert and tighten the screws (2). Ensure that the deflector
is tight and will not move during operation.
To mount the skirt and line limiting blade:
1
2
1
3
4
0458-725-8221-A