Inserting And Removing The Connecting Cord; Inserting The Connecting Cord; Removing The Connecting Cord - Stihl FSA 130 R Instruction Manual

English
If the mowing head or the metal cutting attachment will not
rest gently on or just above the ground:
► Loosen the screw on the carrying ring (2).
► Slide the carrying ring (1) along the drive tube and re-
tighten the screw.
► Allow the trimmer / brushcutter to hang freely again.
Repeat and re-adjust as necessary to achieve the proper
balance.
► Once the cutting attachment is properly positioned for
work, tighten the screw firmly and ensure that the carrying
ring is secure.
14 Inserting and Removing the
Connecting Cord

14.1 Inserting the Connecting Cord

WARNING
Never use a malfunctioning, damaged, cracked, leaking or
deformed battery, @ 7. Use and store the battery only
within an ambient temperature range of 14 °F to 122 °F (- 10
°C to 50 °C), @ 7.
40
1
2

14 Inserting and Removing the Connecting Cord

To insert the connecting cord:
► Line up the arrow on the connecting cord plug (2) with the
arrow on the socket (1).
► Push the plug straight into the socket with steady, even
pressure until it is fully inserted.

14.2 Removing the Connecting Cord

WARNING
To reduce the risk of severe personal injury from unintended
activation, always remove the connecting cord before
assembling, transporting, adjusting, cleaning, servicing,
maintaining or storing the trimmer / brushcutter. Remove the
connecting cord in the event of malfunction or emergency
and any time the trimmer / brushcutter is not in use.
WARNING
To reduce the risks of electric shock and other personal
injuries from the loss of control, always switch off the
trimmer before removing the connecting cord from the
socket.
To remove the connecting cord:
► Release trigger switch.
► Pull the plug straight out of the trimmer socket with steady,
even pressure.
1
2
0458-725-8221-A