Mounting And Removing A Mowing Head - Stihl FSA 130 R Instruction Manual

11 Assembling the Trimmer / Brushcutter
► Insert the guide ridge on the bottom of the deflector (1)
into the groove on the skirt (2).
► Slide the skirt until it covers the entire bottom of the
deflector and clicks into place.
When the skirt is properly installed, it will cover the
pictogram embossed on the deflector indicating that use
with mowing heads is prohibited.
► Push the line limiting blade (3) into the guide groove of the
skirt.
► Insert and tighten the screw (4) until the line limiting blade
is securely in place.
11.4.2 Removing a Deflector
To remove a deflector:
► Switch off the power tool, @ 15.2.
► Remove the connecting cord, @ 14.2.
2
► Remove the screws (2).
► Remove the deflector (1)
0458-725-8221-A
To remove the skirt from the deflector:
► Insert the stop pin (2) in the hole in the skirt.
► Slide the skirt (1) off the guide ridge at the bottom of the
deflector.

11.5 Mounting and Removing a Mowing Head

11.5.1 Mounting a Mowing Head
1
WARNING
Use of wire or metal-reinforced line is not authorized and
could be extremely dangerous. Use only the cutting
attachments recommended in this manual, in combination
with the recommended deflector, @ 5.7.4.
WARNING
A damaged or loose cutting attachment or mowing head may
vibrate, crack, break or come off the trimmer / brushcutter,
which may result in serious or fatal injury or property
damage. Make sure the mowing head and cutting
attachment are properly tightened and in good condition
before starting work, @ 5.7.4.
Mowing heads other than FixCut 31-2
To mount a mowing head:
► Switch off the power tool, @ 15.2.
► Remove the connecting cord, @ 14.2.
English
2
1
29