Reset All; System Time Clear - JRC JMA-3400 Series Instruction Manual

8.7.2 RESET ALL

If system operation is unstable, it may be stabilized by initialized the memory area. To initialize the memory
area, the all settings become to the factory inspection settings. It is recommended that you save to USB
storage internal settings before to run the "reset all." (see 8.7.6.1)
If you press YES, the operation will be executed immediately.
When executed, the display unit will automatically restart.
Note that performing "Reset All" erases data, such as marks/lines.
"Reset All" make to initialize the memory area, the all settings become to
the factory inspection settings.

8.7.3 SYSTEM TIME CLEAR

If you press YES, the operation will be executed immediately.
The operating time of the display unit can be initialized.
Chapter 8 DETAIL PERFORMANCE
SETTINGS
163