JRC JMA-3400 Series Instruction Manual page 249

Alarm Name
Scanner Standby
High Temperature
High Latitude
Invalid Version
TT(Max Target)
TT(Out of Range)
MAX Range Scale
MIN Range Scale
Chapter 9 MAINTENANCE AND CHECK
Class Description
The functions which are available only during transmitting are
operated during standby (or preheating).
- Setting Timed TX to on.
- Cursor operations during standby (no graphic display is
available).
Status
- Custom position setting for off center.
- Inputting/erasing/moving marks
- Inputting/erasing/moving/inserting lines
- TT acquisition/release/numerical display selection.
- Guard zone creation
The temperature in the radar antenna is 80 ℃ or
higher.
Caution
Operations for the position of latitude 80 degrees or more.
MOB input.
Event mark input.
Status
Input/moving marks.
Input/moving/inserting lines.
Creating latitude/longitude alarm area.
Program is loading a file with an incompatible version.
- Internal setting
Status - Marks/lines
- Option languages
- STC curve
Detected when DSP tries to acquire 21 targets or more
DSP notifies the maximum target alarm occurrence of automatic
Status
acquisition to the TT process task, then the TT process task
notifies it to the alarm task
TT is too far to be tracked
Status
Range up operations at the maximum range
Status
Range down operations at the minimum range
Status
201