Table of Contents
Advertisement
Chapter 5 VARIOUS FUNCTIONS
5.35.3 STANDBY TIME
Set the time for standby state. Use the cross key or the MULTI control to change the value.
The standby time can be adjusted between 1 and 99 min.
Note:
If you execute function of the timed TX, please be careful.
Because if you forget to execute the timed TX, you will misunderstand that radar transmitting was stopped
and radar echo disappeared in the transmitting. You must be remembered that you had set on function of
Timed TX. Please use timed TX with caution fully.
5.36 TLL TX "USER2"
When this function is turned on, TLL sentence is transmitted with pressing the User2 key.
Press the User2 key once, TLL sentence is transmitted once. If another function is allocated "User2 Short
Press", both the assigned function and TLL TX are performed by pressing the User2 key.
Select the target of TLL in "Target Information TX."
For details of target information TX setting, see "7.6.6 TARGET INFORMATION TX."
5.37 CERTIFICATION INFORMATION
Display the certification information.
124
Advertisement
Table of Contents
