Display; Integrated Display Unit (Ncd-2364) - JRC JMA-3400 Series Instruction Manual

12.6 DISPLAY

12.6.1 INTEGRATED DISPLAY UNIT (NCD-2364)

1) Structure
2) Dimensions
3) Mass
4) Tune Method
5) STC (SEA)
6) FTC (RAIN)
7) Radar Interference Rejection
8) Bearing Marker
9) Heading Line
10) Off Center
11) True Motion Unit
12) True Motion Reset Position
13) Radar trail indication
Desk Top Integrated Type
(LCD Monitor Unit/Keyboard Unit/Processor Unit Integrated Structure)
Vertical installation only desk top integrated type
Without bracket and side knob
Height 320mm × Width 320mm × Depth 95.1mm
Including bracket and side knob
Height 340mm × Width 342mm × Depth 95.1mm
(Depth is the depth from the front panel, not including the
control knobs.)
Approx. 5 kg
Manual / Auto
(Bar-graph indication is displayed at the time of adjustment.)
Manual / Auto
Manual / Auto
Built-in (The effect can be adjusted by three stages.)
360° in 5° digit
Electronic (Can be temporarily hidden)
Move to the defined coordinates of 4 patterns
Built-in (Not available at the maximum range)
66% of radius of any range
True motion mode:
Relative motion mode:
Trail time length:
Short: 15sec/30sec/1min/2min/3min/4min/5min/6min
/10min/15min/Continuous
Middle: 30sec/1min/2min/3min/4min/5min/6min/10min
/15min/30min/Continuous
Long: 1min/2min/3min/4min/5min/6min/10min/15min/
30min/1hr/Continuous
Super Long: 30min/1hr/2hr/3hr/4hr/5hr/6hr/10hr/12hr
/24hr/Continuous
The trail length can be switched instantaneously.
Possible to display time series trail and continuous trail
by color classification.
Even if the movement mode, bearing mode, or range is
changed, the radar trails can be taken over.
Chapter 12 SPECIFICATIONS
Only true motion trails
True or relative motion trails
221