Target Number Allocation; Tll Target Number Allocation; Alr Alarm From Ais; Ais Display Target - JRC JMA-3400 Series Instruction Manual

Chapter 5 VARIOUS FUNCTIONS

5.24.6 TARGET NUMBER ALLOCATION

The start number of targets can be specified for the target symbol or AIS symbol. Use the cross key or the
MULTI control to change the value.
The start numbers of TT and AIS target can be specified respectively.
The start number of TT can be set between 0 and 70.
The start number of AIS can be set between 0 and 900.

5.24.7 TLL TARGET NUMBER ALLOCATION

Select the position that it output as the position of the TLL sentence. The position can be selected from own
ship's position or the cursor position.
The target number for TLL sentence can be specified.

5.24.8 ALR ALARM FROM AIS

Set the display of NMEA ALR sentence received from AIS.

5.24.9 AIS DISPLAY TARGET

Set the number of AIS display targets. Set this to get a better look at the screen by limiting the number of AIS
symbols.

5.24.10 AIS DESTINATION SHIP

Set the MMSI of the AIS destination ship. Use the cross key or the MULTI control to change the value.
If unsetting the AIS destination ship, input "0."

5.24.11 AIS RETRIEVED VESSEL

Set the MMSI of the AIS retrieved vessel. Use the cross key or the MULTI control to change the value.
AIS retrieved vessel can be set up to 10 vessels.
If unsetting the AIS retrieved vessel, input "0."

5.24.12 AIS FILTER

Set the range of AIS filter. Use the cross key or the MULTI control to change the value.
102