Washing The Parts Coming Into Contact With Food; Using The Appliance - Saeco AULIKA EVO TOP HSC Operation And Maintenance

These simple operations will allow you to always brew
excellent coffee.
They have to be performed:
• at first start-up;
• when the machine remains inactive for a long time (more
than 2 weeks).
7.13.1 After a Period of Inactivity
Empty the water tank, wash and rinse it and fill it with
fresh water (see section "Filling the Water Tank").
Place a large container under the dispensing spout.
Press the "Coffee" button to start brewing. The machine
starts brewing coffee from the dispensing spout. Wait until
brewing has been completed and empty the container.
Repeat the brewing process 3 times.
Place a container under the hot water wand.
Press the "Hot Water" button to start dispensing HOT
WATER.
When the hot water dispensing procedure has been
completed, empty the container.
The machine is now ready for use.
7.14 Washing the Parts coming
into Contact with Food
Rinse all the parts coming into contact with food.
• Thoroughly wash your hands.
• Prepare a chlorine-based, antibacterial disinfecting solution
(the products can be purchased at the chemist's) following
the concentrations indicated on the product.
• Remove all product containers from the appliance.
• Remove the container lids and product chutes. Immerse
all these parts in the previously prepared solution.
7.15

Using the Appliance

Before using the machine,
read this manual carefully
and make sure users are
familiar with the machine.
After the machine has not
been used for a certain
time, it is recommended to
read section "First Use -
Use after a Long Period of
Inactivity"
using the module again.
The beverage selection modes are indicated in chapter
"Operation and Use".
US English
again, before
39