Saeco AULIKA EVO TOP HSC Operation And Maintenance page 50

US English
MENU ITEM
MILK QUANTITY
Pause
High Speed Milk
Off
On
Default
HOT WATER
WATER QUANTITY
Default
milk
MILK QUANTITY
Default
EXTRA
LARGE COFFEE
Prebrewing
Off
Low
High
COFFEE TEMPERATURE
Low
Normal
High
50
Description
This setting can only be adjusted for beverages containing milk and allows you to
program the amount of milk dispensed for each selected beverage.
The bar allows you to set the exact amount of milk to be dispensed (the value is
measured in seconds).
NOTE:
alternatively, this parameter may be configured while brewing using the "CONFIG.
BREWING MODE" menu
This value between 0 and 60 secs - if different from zero - performs a pause of the value set in seconds to
stratify the milk before brewing the coffee.
This setting can only be adjusted for beverages containing milk and allows the machine to dispense milk and
coffee at the same time.
Milk and coffee are dispensed in two separate steps.
NOTE:
in this case, the various dispensing stages (coffee or milk) can be individually stopped.
Milk and coffee are dispensed at the same time.
NOTE:
in this case, the user can only stop dispensing the beverage as a whole.
Setting ECOMODE to OFF brings down the dispensing time of mixed products.
The original standard values assigned by the manufacturer to each beverage can be reset.
After selecting this function, the customised individual beverage settings are deleted.
To manage the Hot water beverage dispensing parameters.
This setting can only be used to adjust Hot Water and allows you to program the
amount of water to be dispensed each time the corresponding button is pressed.
The bar allows you to set the exact amount of water to be dispensed (the value is
measured in turbine pulses).
The original standard values assigned by the manufacturer to each beverage can be reset.
After selecting this function, the customised individual beverage settings are deleted.
To manage the Milk beverage dispensing parameters
This setting can only be adjusted for beverages containing milk and allows you to
program the amount of milk dispensed for each selected beverage.
The bar allows you to set the exact amount of milk to be dispensed (the value is
measured in seconds).
NOTE:
alternatively, this parameter may be configured while brewing using the "CONFIG.
BREWING MODE" menu
The original standard values assigned by the manufacturer to each beverage can be reset.
After selecting this function, the customised individual beverage settings are deleted.
To adjust the parameters of the Extra beverages.
To manage the Large Coffee beverage brewing parameters
Pre-brewing:
the coffee is slightly dampened before brewing so as to bring out the full aroma of the
coffee and to acquire an excellent flavour
pre-brewing is not performed.
active.
longer in order to bring out the coffee taste.
This section allows the coffee brewing temperature to be adjusted
lowest brewing temperature
standard brewing temperature
highest brewing temperature