Table of Contents
Advertisement
US English
7.6.2
After a Period of Inactivity
Empty the water tank, wash and rinse it and fill it with
fresh water (see section "Filling the Water Tank"). Place a
large container under the coffee dispensing spout.
Open and close the capsule loading tray and press the
"Coffee 8 Oz." button - with no capsule inserted - to start
brewing. The machine starts brewing coffee from the
dispensing spout. Wait until brewing has been completed
and empty the container. Repeat the brewing cycles 3
times, opening and closing the capsule loading tray each
time. Place a container under the hot water dispensing
spout.
Press the "Hot Water" button. The machine starts
dispensing hot water until it stops automatically. Continue
dispensing water until the no water icon is displayed.
32
When the hot water dispensing procedure has been
completed, empty the container. Fill the water tank again
up to the MAX level. The machine is now ready for use.
7.7
Washing the Parts coming
into Contact with Food
Rinse all the parts coming into contact with food.
• Thoroughly wash your hands.
• Prepare a chlorine-based, antibacterial disinfecting solution
(the products can be purchased at the chemist's) following
the concentrations indicated on the product.
• Remove all product containers from the appliance.
• Remove the container lids and product chutes.
• Immerse all these parts in the previously prepared
solution.
7.8
Using the Appliance
Before using the machine,
read this manual carefully
and make sure users are
familiar with the machine.
After the machine has not
been used for a certain
time, it is recommended to
read section "First Use -
Use after a Long Period of
Inactivity"
using the module again.
The beverage selection modes are indicated in chapter
"Operation and Use".
again,
before
Hide quick links:
Advertisement
Table of Contents
