Saeco AULIKA EVO TOP HSC Operation And Maintenance page 54

US English
MENU ITEM
Water Net
Off
On
Enable Filter
Off
On
Activate Filter
DESCALING
Start Descale
Descale Warning
Off
On
Factory settings
Payment system
DECOUNT LED BEVERAGE
Price Menu
Espresso
Espresso x2
Coffee
LARGE COFFEE
AMERICAN COFFEE
HOT WATER
Cappuccino
54
Description
To activate the function that enables machine operation with the water network (only
for models designed accordingly).
NOTE:
Use this function with utmost care, as a wrong setting may cause malfunctions.
The "ON" option must only be activated if the "Water Network" kit is installed and
connected properly.
Using it under any other conditions will result in a machine failure.
When the "ON" option is selected the "ENABLE FILTER" and "ACTIVATE FILTER"
functions will be hidden and will not be available for selection.
With this setting, the machine will work only if the tank is installed.
With this setting, the machine will work using water from the water network.
To activate/deactivate the water filter replacement warning.
By activating this function, the machine notifies the user when the water filter should be
replaced.
This function is visible only if the "WATER NET" function is set to OFF.
Warning disabled.
Warning enabled (this value is automatically set when the filter is activated).
To activate the filter after its installation or replacement.
Refer to section ""INTENZA+" Water Filter" to correctly install and/or replace it.
This function is visible only if the "WATER NET" function is set to OFF.
This function allows you to perform the descaling cycle (see section "Descaling").
This function starts the descaling cycle as described in the relevant section.
This function activates the display warning message indicating that the machine should be descaled.
With this setting, the warning message is disabled.
With this setting, the warning message is enabled;
the message is displayed when the machine needs to be descaled.
This function allows all factory settings to be restored.
NOTE:
this section allows the factory settings of the machine menu personal settings to be
restored.
This menu matches the price lines to the various beverages and allows you to illuminate the beverage buttons
regardless of the availability of credit for brewing
If enabled, this function illuminates the beverage buttons regardless of whether or not there is credit available
for brewing.
This menu allows you to set the price of the products that the machine can dispense.
NOTE:
Price management is the same for all products.
For each product, the machine detects 3 price lines:
0: free product (no payment is required);
1: product that can only be dispensed once the amount (1) shown on the coiner has
been reached;
2: product that can only be dispensed once the amount (2) shown on the coiner
(normally higher than amount 1) has been reached.
Prices must be managed on the coiner or on the "Rfid" system as described in the
relevant manuals, and cannot be controlled by the machine.
To manage the price of espresso.
To manage the price of espresso x2.
To manage the price of Coffee.
To manage the price of Large Coffee.
To manage the price of American Coffee
To manage the price of Hot water
To manage the price of cappuccino.