Saeco AULIKA EVO TOP HSC Operation And Maintenance page 93

If they do not match, proceed as described below:
Ensure that the lever is in contact with the brew group
base.
Make sure that the hook which locks the brew group is in
the correct position. firmly press the "PRESS" button to
check its position.
Insert the brew group into its seat again until it locks into
place WITHOUT pressing the "PRESS" button.
Close the service door.
Ensure that
group is completely dry
before putting it back into
the machine.
10.2.9
Besides weekly cleaning, we recommend performing a
cleaning
approximately 500 cups of coffee or once a month.
This operation completes the maintenance process for the
brew group.
Both the "Coffee Oil Remover" system used to clean the
brew group and the "Maintenance Kit" may be purchased
at your local dealer or at authorised service centres.
The wash cycle cannot be interrupted. Do not leave the
machine unattended during this operation.
the brew
Access the user menu as described in the "Access to the
User Menu" section.
Brew Group Cleaning with
the "Coffee Oil Remover"
cycle with "Coffee
The "Coffee Oil Remover"
system has no descaling
properties. For descaling,
use the Saeco descaling
solution and follow the
procedure described in the
"Descaling" chapter.
Do not drink the solution
dispensed during
procedure. The solution
must be disposed of.
US English
Oil Remover" after
this
93