Setting The User Menu Password - Saeco AULIKA EVO TOP HSC Operation And Maintenance

8.4 Setting the user menu
password
The PASSWORD must be set by the service provider in
order to prevent access by unauthorised personnel who
could change the machine settings and cause malfunctions.
To set the PASSWORD, proceed as follows:
Switch to machine programming mode as described in
section "Access to the Technical Menu".
Select the "SETTINGS" option and press the "OK" button.
To select the "MACHINE MENU" option, press the
"DOWN" button.
Press the "OK" button to enter.
Press the "OK" button to access the "GENERAL MENU".
Press the "DOWN" button until the "SET USER
PASSWORD" option is selected.
Press the "OK" button to enter.
Now the PASSWORD can be set.
Press the "DOWN" button or the "UP" button to set the
desired number.
Press the "OK" button to confirm the highlighted number
and to move on to the next number.
Carry out the procedures described in the previous steps
to set the chosen numbers.
Here is an example that explains the procedure.
US English
57