Washing The Parts Coming Into Contact With Food; Using The Appliance - Saeco Royal PLUS Operation And Maintenance Manual

Place a large container under the coffee dispensing spout.
Press the "Coffee" button to start brewing. The machine
starts brewing coffee from the dispensing spout. Wait
until brewing has been completed and empty the
container. Repeat the brewing process 3 times.
Place a container under the hot water dispensing spout.
Press the "Hot Water" button to start dispensing HOT
WATER.
When the hot water dispensing procedure has been
completed, empty the container.
The machine is now ready for use.
7.12 Washing the Parts coming
into Contact with Food
Rinse all the parts coming into contact with food.
• Thoroughly wash your hands.
• Prepare a chlorine-based, antibacterial disinfecting
solution (the products can be purchased at the
chemist's) following the concentrations indicated on
the product.
• Remove all the covers and all the containers from the
appliance.
• Immerse all these parts in the previously prepared
solution.
7.13

Using the Appliance

Before using the machine,
read this manual carefully
and make sure users are
familiar with the machine.
After the machine has not
been used for a certain
time, it is recommended
to read section "First Use -
Use after a Long Period of
Inactivity"
using the module again.
The beverage selection modes are indicated in chapter
"Operation and Use".
English
again, before
35