Comtech EF Data LBC-4000 Installation And Operation Manual page 56

LBC-4000 L-Band Up/Down Converter System
Remote Control
Command
Parameter (Instruction
Type Code and
qualifier)
Retrieve N/A
Utility Status
Concise N/A
Utility Status
Arguments for
Description of arguments
Command or
(Note that all arguments are ASCII numeric
Response to
codes, that is, ASCII codes between 48 and 57)
Query
98 bytes alpha Query only.
numerical Used to Query the utility features of the unit.
Syntax: RUS_
TIME=hh:mm:ss
DATE=mm/dd/yy
FSDA=xxxx (Reserved for future use)
FSDB=xxxx (Reserved for future use)
BVFD=yyy
SCRT=zzz
BULK=FW9965-
M&C =FW9966-
FPGA=FW9967-
43 bytes alpha Query only.
numerical Used to Query the Maintenance status of the unit.
Syntax:
CUS_tt:tt:ttdd/dd/ddabcsssfffffffggggggghhhhhhh
Where:
tt:tt:tt = time in hh:mm:ss
dd/dd/dd = date in mm/dd/yy
a =X (reserved for future use)
b = X (reserved for future use)
c = display brightness,
0=100%, 1=75%, 2=50%, 3=25%
sss = screen saver time in minutes
fffffff = Bulk firmware
ggggggg = M&C firmware
hhhhhhh = FPGA firmware
MN/LBC4000.IOM
Revision 2
Response to
Command
(target to
controller)
N/A
N/A
A-16
Query Response to
(Instruction Query
Code and (target to
qualifier) controller)
RUS_ RUS_
x....x
(see description for
details of
arguments)
CUS_ CUS_
x....x
(see description for
details of
arguments)