Milnor MWF63C7 Installation And Service page 17

Safety—Tilting Washer-Extractors
• Do not use the machine in any manner contrary to the factory instructions.
• Use the machine only for its customary and intended purpose.
• Understand the consequences of operating manually.
Careless Servicing Hazards—Vital Information for Service Personnel (see also
5.2.2.
service hazards throughout manuals)
WARNING 20 : Electrocution and Electrical Burn Hazards—Contact with electric
power can kill or seriously injure you. Electric power is present inside the cabinetry unless the
main machine power disconnect is off.
• Do not service the machine unless qualified and authorized. You must clearly understand
the hazards and how to avoid them.
• Abide by the current OSHA lockout/tagout standard when lockout/tagout is called for in
the service instructions. Outside the USA, abide by the OSHA standard in the absence of
any other overriding standard.
WARNING 21 : Entangle and Crush Hazards—Contact with moving components
normally isolated by guards, covers, and panels, can entangle and crush your limbs. These
components move automatically.
• Do not service the machine unless qualified and authorized. You must clearly understand
the hazards and how to avoid them.
• Abide by the current OSHA lockout/tagout standard when lockout/tagout is called for in
the service instructions. Outside the USA, abide by the OSHA standard in the absence of
any other overriding standard.
WARNING 22 : Crush Hazards—Tilting machines only—The machine housing will crush
your body or limbs if it descends or falls while you are under it. Housing can descend with power
off or on. Manual operation of tilting valves overrides safety interlocks. Improper operation of
manual tilting valves may cause the housing to descend.
• Secure both red safety supports in accordance with the instructions furnished, then lock
out and tag out power at the main machine disconnect before working under the tilted
machine.
• Do not operate the manual tilt valves with anyone under the machine.
• Do not operate the tilt controls with anyone under the machine.
WARNING 23 : Crush Hazards—Tilting machines with front and rear tilt cylinders—The
housing will fall and lunge forward or rearward if the tilt wheels on the non-tilted end lift out of
their cradles, even with safety supports in place.
• Understand the consequences of operating manually.
WARNING 24 : Confined Space Hazards—Confinement in the cylinder can kill or injure
you. Hazards include but are not limited to panic, burns, poisoning, suffocation, heat prostration,
biological contamination, electrocution, and crushing.
• Do not enter the cylinder until it has been thoroughly purged, flushed, drained, cooled,
and immobilized.
PELLERIN MILNOR CORPORATION
— End of BIUUUS27 —
13