Table of Contents
Advertisement
Installation
Description
WARNING
This hose must be used with an FTS and
cable to provide grounding. Read warnings,
page 6.
The heated hose maintains proper fluid tem-
perature while spraying.
Fluid hoses are marked with red tape for
ISO/hardener/minor volume side, blue tape for
RES/resin/major volume side. Fittings have dif-
ferent sized threads to prevent incorrect con-
nection, which can cause fluid crossover and
permanently damage the hose.
Hoses are 50 ft (15.2 m) or 25 ft (7.6 m) long.
The whip hose is 10 ft (3 m) long.
To heat the major volume hose only in a
wide ratio system, see 15F144 Hose
Wire Jumper, page 20.
8
Set Transformer Wire Taps
Transformer tap wire connections vary
depending on proportioner and length of
heated hose. See proportioner operation man-
ual for further information. Some models are
automatic and have no user-set taps. Verify
that tap wire connections are correct.
Hose Length* ft (m)
50 - 85 (15.2 - 25.9)
100 - 135 (30.5 - 41.1)
150 - 185 (48.7 - 56.4)
200 - 235 (60.1 - 71.6)
250 - 285 (76.2 - 86.9)
300 - 310 (91.4 - 94.5)
* Length includes heated fluid hose and whip
hose.
Installation
Tap Terminal
Label (ft)
50
100
150
200
250
300
309572M
Advertisement
Table of Contents
