Table of Contents
Advertisement
Operation
WARNING
Read warnings, pages 6 and 7.
Do not operate a coiled hose. A coiled hose
creates uneven heat buildup which can result
in hose rupture and cause serious injury,
including fluid injection.
Maximum hose operating temperature is
180°F (82°C). If using hose without an FTS,
measure hose temperature to ensure it does
not exceed 180°F (82°C).
Hose must be properly supported to avoid
excessive strain due to weight, bending,
sharp edges, or stress caused by running
over a roof edge.
1. Connect air hose (C) to main air supply if
equipped.
2. Connect electrical connectors (D) to con-
nector from fluid manifold (M) or accessory
control box. See Connect Heated Hoses,
page 9. Connect hose cable (F) to cable
from proportioner fluid manifold (M) or
accessory control box. Wrap connections
with electrical tape.
M
F
F
. 13
IG
16
D
T
C
ti9878A
3. Connect to spray gun. See gun manual.
4. Connect whip air hose to gun air inlet if
equipped. See gun manual.
5. Follow setup, startup, and operation proce-
dures in proportioner manual.
Maintenance
WARNING
Read warnings, pages 6 and 7.
1. Before disconnecting or repairing hoses,
relieve all fluid pressure and shut off electri-
cal power to proportioner. See proportioner
operation manual.
2. Be sure fluid is cool before disconnecting
hoses.
Operation
309572M
Advertisement
Table of Contents
