IBM 3745 Console Setup Manual page 162

o
c
o
o
o
Saving the Modem Configuration
1. Press the
~
key until the 'CONFIG
I
message displays at the top of the screen.
2. Press the
-+
key until the
I
Store User Conf.
I
message displays at the bottom
of the screen.
3. Press Enter.
4. Press the
t
key, to select the User Configuration Location (0 to 9) where you
want to save the configuration.
5. Press Enter to save the current modem configuration.
The defined configuration is now active and saved. Every time the modem is reset
(powered ON), this configuration is loaded.
Transmission Speed The IBM 7858 uses an Adaptive line rate facility which can
automatically decrease or increase the modem1s transmission speeds. This means
that if telecommunication line conditions deteriorate, the modem can still function at
the highest possible efficiency.
Setting and Saving the Target Service Processor Phone Number
1. Press the ~ key until 'Store phone number' display at the top of the screen.
2. Press the
-+
key to select the first location number.
3. Press Enter.
4. Press the
t
key to select a digit. Press the
-+
key to move to the next position
(~ key can be used for backspacing).
5. Press Enter twice to save the target service processor's phone number.
Chapter 12. Modem Setup
12-7