IBM 3745 Console Setup Manual page 117

Parameter Values that Must Be the Same
Table 8-1 gives the sets of MOSS-E parameters that must have the same value in
both the remote workstation and the target service processor.
Table 8-1. Identical Target and Controlling Parameters
In Service Processor In Remote Workstation
APPN LU name LU name
(Figure 8-2 on page 8-3) (Step 11 on page 8-7)
APPN Destination address LAN Destination address
(Figure 8-2 on page 8-3)
(Step 11 on page 8-7)
RSAP Remote SAP
(Figure 8-2 on page 8-3) (Step 11 on page 8-7)
The configuration procedure in this chapter explains how to find these parameters
in the remote workstation.
Configuring the Service Processor in MOSS-E
The following procedure explains how to find, record, and configure the service
processor parameters:
Step 1. In the MOSS-E primary window, double click the Service Processor
object.
Step 2. Click Configuration Management.
Step 3. Double click SP customization.
8-2
All 3745 Models & the 3746-900: CSG
o
o