IBM 3745 Console Setup Manual page 144

o
o
o
c
o
6. Open the Keyboard/Printer Menu and fill in the fields as follows:
Keyboard
Enter
Return
New line
Send
Insert character
Printer
Line speed
Word length (bits)
Parity
Stop bit
Characters
7. Press Enter.
RETURN (not Model 110)
FIELD
CR
PAGE
' M ODE
2400
7
EVEN
1
NATIONAL (not Model 110)
8. Use the arrow keys to highlight Save data.
9. Press the spacebar to save the configuration.
10. Hold down the Ctrl key (bottom left) and press the Setup key (top right) to
return.
11. Go to ''Testing the Modem Connection to a Remote Console" on page 11-13
and check the connection to the 3745.
3151 in 3101 Emulation Mode (Remote)
Important Note: If you have difficulty in using the 3151 as a remote console for a
3745 Model 210 or 410, contact your IBM service representative to ensure that you
have the correct MCA card installed.
Notes:
1. Native mode is the recommended mode of operation.
2. The 3151 Model 110 can only be used in native mode because it does not
support 3101 emulation.
3. The line not Model 110 does not appear on the Model 110 menu.
Setting Up
1. Hold down the Ctrl key (bottom left) and press the Setup key (top right).
Note: If the 3151 is new, Setup displays automatically when you power ON.
Chapter 11. Setting Up a Remote Console
11-3