IBM 3745 Console Setup Manual page 150

o
o
o
o
o
Turnaround character
Scroll i ng
Mode
Null suppression
31. Press Enter to continue.
DC3
NO
BLOCK
YES
Type of connection DIRECT
Automatic XON/XOFF flow control YES
Minimum time
f~r
break signal
5ee
Enhanced keyboard profile name
ACSAENUS *
AT keyboard profile name ACSAATUS
*
Transfer to IBM protocol converter NO
Change parameters for ASCII text files NO
Data capture file name CAPTURE.XXX (for example)
Auto-start data capture NO
Auto-activate data filter YES
* These are the default U.S.A. profiles. For other country profiles,
press F4. For more information, refer to Appendix A.
32. Press Enter.
33. Select Default ASCII terminal emulation profile name.
34. Type
MOSSR
and press Enter.
The message
The profile has been saved· displays.
35. Press Esc twice to display the Communications
Configuration menu.
36. Select
Verify, then Run Verify.
The Verified message displays.
If the message does not display, check that you have entered the data
correctly.
Press Enter.
37. Select
Exit.
38. Select
Exit Communication Configuration.
39. Select Exit.
40. Select Exit Communication Manager.
41. Select
Yes.
42. When the
Display Feature Status screen closes, select
F3=Exit.
43. The Start Programs menu displays.
44. Select OS/2
full-screen command prompt.
45. Use the system editor to create STARTUP .CMD file, containing the
following lines:
@ECHO OFF
CD\CMLIB
START "COMM.MGR MOSSR" IFS IN DMPC ACS.CNF IA:ACS ACS.EXE
EXIT
46. Restart the system by pressing Ctrl, Alt, and Del.
Chapter 11. Setting Up a Remote Console
11-9