IBM 3745 Console Setup Manual page 152

o
o
o
c
o
~
window
Keyboard Profile Module - CUSTOM.MOB
b. Click
Add.
~ window Add keyboard
c. In the keyboard type list, select
AT 84 key, or 101 Enhanced or 102
Enhanced depending on your key board.
d. In the terminal keyboard type list, select IBM 3101-2X.
e. In the nationality list, select the country where you reside.
f. Click
OK.
~
window
Keyboard Settings - Untitled
The default keyboard mapping is displayed. The Control, Alt and
Function keys are used for 3101 functions.
Note: Function keys F1 to F10 correspond to the same keys, and
F11 to F20 correspond to Shift-F1 through Shift-F10.
If you want to change the keyboard mapping, use the following
procedure:
1) On window Keyboard Settings - Untitled, click Change.
~ window Keyboard Remap
2) When the keyboard map displays on the screen, click a key to
see the corresponding 3101 definition. For example, if you want
to remap the Send key to Enter instead of the default
Control-F1, click the Enter key on the map, and then click Open
Base.
~
window
Open/Edit Key
3) In the
Key contents entry field, delete
Return
and type
Send.
4) Click OK. You can remap any other keyes).
g. When you have finished, click Remap.
~
window
Keyboard Settings - Untitled
h. Click
Save as to save the keyboard profile.
~
window Save Keyboard - CUSTOM.MOB
i. Enter the keyboard profile name, for example,
3101 keyboard.
j. Click Save.
~
window Keyboard Profile Module - CUSTOM.MOB
k. Click Close.
~
window
Terminal Emulation Profile Module - CUSTOM.MOB
Step 5. Customize the 3101 terminal settings, and change the following
parameters:
• Operating mode,
• Line Turn Around Character.
All the other parameters keep their default values.
Step 6. In Terminal Emulation Settings list, select the parameter and click
Change:
• For Operating mode, click
Block and then OK.
• For Line Turn Around Character, click
Xoff($13) and OK.
Chapter 11. Setting Up a Remote Console
11-11