IBM 3745 Console Setup Manual page 151

47. Go to "Testing the Modem Connection to a Remote Console" on page 11-13
for
information on checking the connections to the 3745.
Note: When a communications task is finished, close CM/2 carefully.
MOSS Remote Console Emulation with CM/2 and Softerm
The following is the setup procedure for a 3101 terminal emulator connection with a
3745 MOSS, using CM/2 and Softerm. To install Softerm, use the following
procedure:
Step
1. Open an OS/2 window or screen.
Step 2. Insert the Softerm diskette into drive A.
Step 3. Type
a:
and press Enter.
Step 4. Type cd\ and press Enter.
Step
5. Type
a: \ ins ta
11 and press Enter.
Step 6. Wait for the installation to complete. A new Custom Plus icon displays.
Note: In the following procedure, window displays are indicated by an
~
followed
by the title of the window.
Starting Custom Plus
Step 1. To start, click the Custom Plus icon twice.
==>
window Custom Plus - Icon View
Step 2. Click twice on Custom Plus icon.
==>
window Softerm Session Manager - CUSTOM.MOB
This window lists several predefined sessions.
Defining a New Session
Step 1. Click Session and then Add.
~
window Add Session - Untitled
Step 2. Click Setup Profiles.
==>
window Setup Profiles
There are two setup profiles, Terminal Emulation and Connection Path.
See the following procedures to setup the Terminal Emulation profile, and the
Connection Path profile.
Defining the Terminal Emulation Profile
Step 1. Click Terminal.
~ window Terminal Emulation Profile Module - CUSTOM.MOB
Step 2. Click Add.
==>
window Terminal Emulation
Step 3. In the terminal types list, select 3101-2X and click OK.
==>
window Terminal Emulation Settings - Untitled
Step 4. In the Comment entry field, type: 3191-2X
Setti ngs for MOSS Con sol e.
For the keyboard profile:
a. Click Setup.
11-10
All 3745 Models
&
the 3746-900: CSG
o
o