Number Of Handlers; Number Of Interrupters; Protocol Register; Read Protocol Response - National Instruments MXI Series Getting Started

Chapter 6 NI-VXI Configuration Utility
PCI-MXI-2 for Linux

Number of Handlers

This field gives the number of interrupt handlers that the PCI-MXI-2
supports.
Interrupt Handlers
0 to 7

Number of Interrupters

This field gives the number of interrupters that the PCI-MXI-2 supports.
Interrupters
0 to 7

Protocol Register

This field specifies the contents of the Protocol register, indicating which
protocols the device supports. This field is meaningful only when the
PCI-MXI-2 is configured as a message-based device. The default value is
0x0ff0 (Commander, Signal Register, Master).

Read Protocol Response

This field specifies the response value to a Read Protocol command
received by the PCI-MXI-2 from the Resource Manager (if the PCI-MXI-2
is not the Resource Manager in your system). This field is meaningful only
when the PCI-MXI-2 is configured as a message-based device. The default
value is 0x8448 (Response Generation, Event Generation, Programmable
Handler, Word Serial Trigger, Instrument, Extended Longword Serial,
Longword Serial).
6-12
Default Value
1
Default Value
0
ni.com