Table of Contents
Advertisement
Chapter 1
Introduction and Quick Start
PCI-MXI-2 for Linux
Table 1-2. PCI-MXI-2 Universal Hardware Default Settings
Hardware Component
SW1 Switch 1 (FOV)
SW1 Switch 2 (TST)
SW1 Switch 3 (POS)
SW1 Switch 4 (CT)
DRAM SODIMM Installed
Table 1-3. PCI-MXI-2 Logical Address Configuration Editor Default Settings
Editor Field
Logical Address
Device Type
Address Space
VXI Shared RAM Size
Shared RAM Pool
Lower Half Window Byte Swapping
Lower Half Window Memory Select
Upper Half Window Byte Swapping
Upper Half Window Memory Select
Resource Manager Delay
Map Upper/Lower Halves to Same Address
1-10
Default Setting
OFF: PCI-MXI-2 boots off the
user-configured half of the EEPROM.
OFF: Factory configuration of the
EEPROM is protected.
OFF: Do not alter this setting.
ON: Do not alter this setting.
Per customer order
Default Setting
0
MBD
A16
0 KB
0 KB
Disabled (non-swapped)
System Memory
Disabled (non-swapped)
System Memory
5 s
Disabled
ni.com
Advertisement
Table of Contents
