Table of Contents
Advertisement
The following table describes the labels in this screen.
Table 28 Wireless > WPS
L ABEL
WPS Setup
Band
WPS
PIN Code
PIN Number
Push Button
Or input station's PIN
number
WPS Status
Status
Release
Configuration
802.11 Mode
SSID
Security
Apply
Cancel
10.8 Sc he duling Sc re e n
Use this screen to set the times your wireless LAN is turned on and off. Wireless LAN scheduling is disabled
by default. The wireless LAN can be scheduled to turn on or off on certain days and at certain times. To
open this screen, click
Chapter 10 Wireless LAN
DESC RIPT IO N
Select the frequency band to set whether you want to apply the wireless and security
settings to the default
2.4G Hz
Select
to turn on the WPS feature. Otherwise, select
Ena b le
Select
and click
Ena b le
Apply
you cannot create a new PIN number.
This is the WPS PIN (Personal Identification Number) of the NBG6604. Enter this PIN in the
configuration utility of the device you want to connect to the NBG6604 using WPS.
The PIN is not necessary when you use WPS push-button method.
Click
to generate a new PIN number.
G e ne ra te
Use this button when you use the PBC (Push Button Configuration) method to configure
wireless stations's wireless settings.
Click this to start WPS-aware wireless station scanning and the wireless security information
synchronization.
Use this button when you use the PIN Configuration method to configure wireless station's
wireless settings.
Type the same PIN number generated in the wireless station's utility. Then click
associate to each other and perform the wireless security information synchronization.
This displays
when the NBG6604 has connected to a wireless network using WPS
C o nfig ure d
or when
is selected and wireless or wireless security settings have been
WPS Ena b le
changed. The current wireless and wireless security settings also appear in the screen.
This displays
if WPS is disabled and there are no wireless or wireless security
Unc o nfig ure d
changes on the NBG6604 or you click
wireless and wireless security settings.
This button is only available when the WPS status displays
Click this button to remove all configured wireless and wireless security settings for WPS
connections on the NBG6604.
This is the 802.11 mode used. Only compliant WLAN devices can associate with the
NBG6604.
This is the name of the wireless network (the NBG6604's first SSID).
This is the type of wireless security employed by the network.
Click
to save your changes back to the NBG6604.
Apply
Click
to reload the previous configuration for this screen.
C a nc e l
.
Wire le ss > Sc he duling
NBG6604 User's Guide
78
or
wireless LAN.
5G Hz
to allow the PIN Configuration method. If you select
Re le a se C o nfig ura tio n
C o nfig ure d
.
Disa b le
Disa b le
to
Sta rt
to remove the configured
.
,
Advertisement
Table of Contents
