Table of Contents
Advertisement
By implementing PPPoE directly on the NBG6604 (rather than individual computers), the computers on
the LAN do not need PPPoE software installed, since the NBG6604 does that part of the task.
Furthermore, with NAT, all of the LANs' computers will have access.
This screen displays when you select
Network > WAN > Internet Connection: PPPoE Encapsulation (IPv4 Only)
Fig ure 32
The following table describes the labels in this screen.
Table 15 Network > WAN > Internet Connection: PPPoE Encapsulation
L ABEL
DESC RIPT IO N
ISP Parameters for Internet Access
Encapsulation
Select
IPv4
Select
Select
PPP Information
PPP Username
Type the user name given to you by your ISP.
PPP Password
Type the password associated with the user name above.
MTU Size
Enter the Maximum Transmission Unit (MTU) or the largest packet size per frame that your
NBG6604 can receive and process.
PPP Auto Connect
Select this option if you do not want the connection to time out.
Chapter 9 WAN
encapsulation.
PPPo E
if you connect to your Internet via dial-up.
PPPo E
if you want the NBG6604 to run IPv4 only.
IPv4 O nly
to allow the NBG6604 to run IPv4.
Dua l Sta c k
NBG6604 User's Guide
56
Advertisement
Table of Contents
