Table of Contents
Advertisement
The following table describes the labels in this screen.
Table 17 WAN > NAT > Port Trigger
L ABEL
Port Trigger Rules (Max. Limit : 32)
#
Name
Incoming Port
End Port
Trigger Port
End Port
Add
Delete
Apply
Cancel
9.5.3 Pa ssthro ug h Sc re e n
AL G O ve rvie w
Application Layer Gateway (ALG) allows VPN traffic to operate properly through the NBG6604's NAT.
The ALG feature is only needed for traffic that goes through the NBG6604's NAT.
To change your NBG6604's VPN pass-through settings, click
appears as shown.
WAN > NAT > Passthrough
Fig ure 35
Chapter 9 WAN
DESC RIPT IO N
This is the rule index number (read-only).
Type a unique name (up to 15 characters) for identification purposes. All characters are
permitted - including spaces.
Incoming is a port (or a range of ports) that a server on the WAN uses when it sends out a
particular service. The NBG6604 forwards the traffic with this port (or range of ports) to the
client computer on the LAN that requested the service.
Type a port number or the starting port number in a range of port numbers.
Type a port number or the ending port number in a range of port numbers.
The trigger port is a port (or a range of ports) that causes (or triggers) the NBG6604 to record
the IP address of the LAN computer that sent the traffic to a server on the WAN.
Type a port number or the starting port number in a range of port numbers.
Type a port number or the ending port number in a range of port numbers.
Click
to add the rule in the port trigger summary table.
Click
to remove a rule.
Click
to save your changes back to the NBG6604.
Apply
Click
to begin configuring this screen afresh.
C a nc e l
NBG6604 User's Guide
60
WAN > NAT > Pa ssthro ug h
. The screen
Advertisement
Table of Contents
