Scheduling Screen - ZyXEL Communications NBG6604 User Manual

The following table describes the labels in this screen.
Table 28 Wireless > WPS
LABEL
WPS Setup
Band
WPS
PIN Code
PIN Number
Push Button
Or input station's PIN
number
WPS Status
Status
Release
Configuration
802.11 Mode
SSID
Security
Apply
Cancel

10.8 Scheduling Screen

Use this screen to set the times your wireless LAN is turned on and off. Wireless LAN scheduling is disabled
by default. The wireless LAN can be scheduled to turn on or off on certain days and at certain times. To
open this screen, click Wireless > Scheduling.
Chapter 10 Wireless LAN
DESCRIPTION
Select the frequency band to set whether you want to apply the wireless and security
settings to the default 2.4GHz or 5GHz wireless LAN.
Select Enable to turn on the WPS feature. Otherwise, select Disable.
Select Enable and click Apply to allow the PIN Configuration method. If you select Disable,
you cannot create a new PIN number.
This is the WPS PIN (Personal Identification Number) of the NBG6604. Enter this PIN in the
configuration utility of the device you want to connect to the NBG6604 using WPS.
The PIN is not necessary when you use WPS push-button method.
Click Generate to generate a new PIN number.
Use this button when you use the PBC (Push Button Configuration) method to configure
wireless stations's wireless settings.
Click this to start WPS-aware wireless station scanning and the wireless security information
synchronization.
Use this button when you use the PIN Configuration method to configure wireless station's
wireless settings.
Type the same PIN number generated in the wireless station's utility. Then click Start to
associate to each other and perform the wireless security information synchronization.
This displays Configured when the NBG6604 has connected to a wireless network using WPS
or when WPS Enable is selected and wireless or wireless security settings have been
changed. The current wireless and wireless security settings also appear in the screen.
This displays Unconfigured if WPS is disabled and there are no wireless or wireless security
changes on the NBG6604 or you click Release Configuration to remove the configured
wireless and wireless security settings.
This button is only available when the WPS status displays Configured.
Click this button to remove all configured wireless and wireless security settings for WPS
connections on the NBG6604.
This is the 802.11 mode used. Only compliant WLAN devices can associate with the
NBG6604.
This is the name of the wireless network (the NBG6604's first SSID).
This is the type of wireless security employed by the network.
Click Apply to save your changes back to the NBG6604.
Click Cancel to reload the previous configuration for this screen.
NBG6604 User's Guide
78