Table of Contents
Advertisement
WAN > Internet Connection: IPoE Encapsulation (IPv4 Only)
Fig ure 31
The following table describes the labels in this screen.
Table 14 Network > WAN > Internet Connection: IPoE Encapsulation
L ABEL
DESC RIPT IO N
ISP Parameters for Internet Access
Encapsulation
You must choose the
IPv4
Select
Select
IP Address
Obtain an IP Address
Select this option if your ISP did not assign you a fixed IP address. This is the default
Automatically (DHCP)
selection.
Static IP Address
Select this option if the ISP assigned a fixed IP address.
IP Address
Enter your WAN IP address in this field if you selected
Subnet Mask
Enter the
Default Gateway
Enter a gateway IP address (if your ISP gave you one) in this field.
MTU Size
Enter the MTU (Maximum Transmission Unit) size for each packet. If a larger packet arrives,
the NBG6604 divides it into smaller fragments.
DNS Server
Chapter 9 WAN
option when the WAN port is used as a regular Ethernet.
IPo E
if you want the NBG6604 to run IPv4 only.
IPv4 O nly
to allow the NBG6604 to run IPv4.
Dua l Sta c k
in this field.
Sub ne t Ma sk
NBG6604 User's Guide
54
.
Sta tic IP Addre ss
Advertisement
Table of Contents
