Table of Contents
Advertisement
10.6 Adva nc e d Sc re e n
Use this screen to allow wireless advanced features, such as the output power, RTS/CTS Threshold
settings.
Click
Wire le ss > Adva nc e d
Wireless > Advanced
Fig ure 46
The following table describes the labels in this screen.
Table 27 Wireless > Advanced
L ABEL
Wireless Advanced Setup
Band
RTS/CTS Threshold
Fragmentation
Threshold
Intra-BSS Traffic
Tx Power
QoS Setup
Chapter 10 Wireless LAN
. The screen appears as shown.
DESC RIPT IO N
Select the frequency band to set whether you want to apply the wireless and security settings
to the default
or
2.4G Hz
5G Hz
Data with its frame size larger than this value will perform the RTS (Request To Send)/CTS (Clear
To Send) handshake.
This field is not configurable and the NBG6604 automatically changes to use the maximum
value if you select
,
802.11n
802.11a n
The threshold (number of bytes) for the fragmentation boundary for directed messages. It is
the maximum data fragment size that can be sent.
This field is not configurable and the NBG6604 automatically changes to use the maximum
value if you select
,
802.11n
802.11a n
A Basic Service Set (BSS) exists when all communications between wireless clients or between
a wireless client and a wired network client go through one access point (AP).
Intra-BSS traffic is traffic between wireless clients in the BSS. When you
clients can access the wired network and communicate with each other. When you
Intra-BSS, wireless clients can still access the wired network but cannot communicate with
each other.
Set the output power of the NBG6604 in this field. If there is a high density of APs in an area,
decrease the output power of the NBG6604 to reduce interference with other APs. Select one
of the following
,
,
100%
90%
NBG6604 User's Guide
76
wireless LAN.
,
or
802.11g n,
802.11b g n
,
or
802.11g n,
802.11b g n
,
,
or
.
75%
50%
25% ,
10%
in the Wire le ss screen.
in the Wire le ss screen.
Intra-BSS, wireless
Ena b le
Disa b le
Advertisement
Table of Contents
