Table of Contents
Advertisement
You can configure up to four SSIDs to enable multiple BSSs (Basic Service Sets) on the NBG6604. This
allows you to use one access point to provide several BSSs simultaneously. You can then assign varying
security types to different SSIDs. Wireless clients can use different SSIDs to associate with the same access
point.
Click
Wire le ss > G ue st Wire le ss
Wireless > Guest Wireless
Fig ure 43
The following table describes the labels in this screen.
Table 24 Wireless > Guest Wireless
L ABEL
Band
#
Status
SSID
Security
Remaining time
Edit
10.4.1 G ue st Wire le ss Edit
Use this screen to edit an SSID profile. Click the
following screen displays.
Chapter 10 Wireless LAN
. The following screen displays.
DESC RIPT IO N
Use
or
to set up the NBG6604's guest Wi-Fi network.
2.4G Hz
5G Hz
This is the index number of each SSID profile.
This shows whether the SSID profile is active (a yellow bulb) or not (a gray bulb).
An SSID profile is the set of parameters relating to one of the NBG6604's BSSs. The SSID (Service
Set IDentifier) identifies the Service Set with which a wireless device is associated.
This field displays the name of the wireless profile on the network. When a wireless client scans
for an AP to associate with, this is the name that is broadcast and seen in the wireless client
utility.
This field indicates the security mode of the SSID profile.
If the user is currently not permitted to access the Internet, you can click the
for a specified period of time. A screen then displays allowing you to set how long (in hours) the
user is allowed to access the Internet.
This field displays the amount of Internet access time that remains for each user before the
NBG6604 blocks the user from accessing the Internet.
access time.
Click the
icon to configure the SSID profile.
Edit
NBG6604 User's Guide
0:0:0
icon next to an SSID in the
Edit
73
to allow access
Se t
means there is no extra Internet
screen. The
G ue st Wire le ss
Advertisement
Table of Contents
