Table of Contents
Advertisement
By implementing PPPoE directly on the NBG6604 (rather than individual computers), the computers on
the LAN do not need PPPoE software installed, since the NBG6604 does that part of the task.
Furthermore, with NAT, all of the LAN's computers will have Internet access.
WAN Selection Type: PPPoE
Fig ure 11
The following table describes the labels in this screen.
Table 6 WAN Selection Type: PPPoE
L ABEL
WAN Selection
PPPoE Username
PPPoE Password
Static IP (Optional)
Note: If you get an error message, make sure you have entered the correct information
provided by your ISP.
3.3.3 WAN Se le c tio n T ype : Sta tic
Choose
Sta tic
Chapter 3 eaZy 123 Wizard
DESC RIPT IO N
Select the
(Point-to-Point Protocol over Ethernet) option for a dial-up connection.
PPPo E
Type the user name given to you by your ISP.
Type the password associated with the user name above.
Enter the WAN IP address assigned by your ISP.
as the
WAN Se le c tio n T ype
NBG6604 User's Guide
when the WAN port is used as a regular Ethernet. Click
21
.
Ne xt
Advertisement
Table of Contents
