Table of Contents
Advertisement
S
YSTEM
5 Click Server > Backup/Restore, and then click the Restore button.
6 In the Restore dialog box, browse to the configuration file that you created earlier, and click
Open.
Installing system software through an Ethernet port
To install system software through an Ethernet port, you will need the following:
• Ethernet crossover cable (4-pair/8-wire, short-length)
To determine whether the cable you are using is a Ethernet crossover cable, compare the
connectors on the cable. The ribbon sequence on the connectors of a Ethernet crossover
cable are not identical.
• Computer with Windows 2000, Windows XP, Windows Vista, or Windows 7
– A DVD drive, built-in or attached
– Support for 100BaseTX or 1000BaseT
– 1.5GB minimum memory capacity
• System Software DVD
The System Software DVD contains the system software and the Fiery System Software
Installer.
S
OFTWARE
53
Advertisement
Table of Contents
