Printing Imagepass Pages - Canon imagePASS-A2 Service Manual

S P 48
ERVICE ROCEDURES

Printing imagePASS pages

As part of servicing the imagePASS, you may need to print certain pages. When system
software is installed on the imagePASS, you can print the following pages from the copier:
• PS Test Page
• PCL Test Page
• Configuration
• Job Log
• Color Charts
• PS Font List
• PCL Font List
• E-mail Log
• FTP Log
The following pages are not available on Japanese servers.
For Japanese product only:
• PCL Test Page
• PCL Font List
Test Page
Use this page to verify that the imagePASS is functional. If the Test Page prints, the
imagePASS is functional and is correctly connected to the copier.
Configuration page
The Configuration page lists all the settings in effect from the current Setup. After you have
configured settings in Setup, you can print the Configuration page and use it to confirm that
the imagePASS is configured as desired. If the imagePASS is rebooting, wait until it reaches
Idle before printing the Configuration page.
It is strongly recommended that you print the Configuration page, if possible, before servicing
the imagePASS. Doing so will allow you to return the settings to their former configurations,
if necessary.
After the connection to the network is made, the site administrator can customize Setup
options according to the network and user environment. Using the Configuration page as a
guide can help speed up this process. For more information, see Configuration and Setup,
which is part of the user documentation set.