Opening The Imagepass; Figure 3: Opening The Imagepass - Canon imagePASS-A2 Service Manual

S P
ERVICE ROCEDURES

Opening the imagePASS

As part of servicing the imagePASS, you may need to open the imagePASS. Before you open
the imagePASS, you must disconnect cables, and then remove the imagePASS from the copier
(see page 14).
After you service the imagePASS, make sure that you close the imagePASS correctly (see
page 16).
Opening the imagePASS
F 3:
IGURE
T PASS
O OPEN THE IMAGE
When you handle electronic components, follow electrostatic discharge (ESD) precautions
(see page 10).
1 Remove the imagePASS from the copier (see
2 Remove the two screws that secure the lid to the chassis (see
3 Carefully lift the lid off the chassis.
page 14) and place it on a flat surface.
Figure 3).
15