Table of Contents
Advertisement
HMR Series Positioners
4
Application, Proper Use
The operational safety of the HMR is only ensured with proper use.
Proper use of the HMR only includes the following:
• Moving loads
• Positioning masses
• Exerting force
The HMR is driven with ball screw or timing belt.
The catalog data and the conditions specified in the order confirmation must be taken into account. Please note the
limits from the technical data and the corresponding characteristic curves as per the catalog information.
The values apply to continuous operation. With intermittent operation, the combination of speed and load may
accommodate higher values for short periods. However, the individual maximum values indicated must not be
exceeded.
If the HMR is used in any other manner, this does not constitute proper use.
Obvious misuse
Any use to transport persons or applications of any manner in the private sector (consumers) is not authorized. This
may result in personal injury and damage to property. We shall accept no liability for any injury or damage resulting
here from. The user shall bear sole responsibility and risk.
The following are not authorized:
• Unauthorized modifications to the HMR
• Processes that affect the safety of the HMR
Note all of the information attached to the HMR.
Keep this information in a fully legible condition.
In addition, note the manufacturer's information regarding lubricants, solvents and cleaning agents.
4.1
Prerequisite for Product Usage
The installation must always be carried out such that:
• The HMR is installed without delay
• All connections and control components are accessible
• The type plate with the product name remains legible
• The ambient conditions are maintained corresponding to design delivered (IP20 or IP54)
The operator must secure any hazardous sources that may result during installation in machines and
systems between Parker-Hannifin products and customer equipment, according to CE conformity.
4.2
Conversions and Modifications
HMR linear drives may not be modified with respect to the design or safety-related features without the written
approval of Parker-Hannifin . Any unauthorized modification in this respect will exclude any liability on the part
of Parker-Hannifin .
If special attachments are to be used, the assembly regulations of the manufacturer must be observed.
The following also apply:
• Relevant accident prevention regulations
• Generally recognized safety rules
• EU directives
• Country-specific provisions.
4.3
Spare Parts and Accessories
Original spare parts and accessories authorized by the manufacturer are intended to protect your safety. The use of
other parts could change the properties of the HMR.
We shall accept no liability for any resulting consequences.
7
WWW.PARKERMOTION.COM
PH: (724)-861-8200
Advertisement
Table of Contents
