Table of Contents
Advertisement
HMR Series Positioners
10
Decommissioning
10.1
Disassembly of a Machine or System
Disassembly and the final decommissioning of the HMR must be carried out by trained mechanical or electrical specialists.
No stored energy (springs, fluid, pressure).
• Pay attention to the weight of any loads being lifted during vertical installation.
• Screws and toothed belts are not self-locking, which means that the Drive Type, carriage and load could free fall.
10.2
Disposal
The HMR does not contain any hazardous substances that require special attention during disposal. Lubricant residue is possible and should be
expected.
In addition to the main aluminum component, there are also installed steel parts and plastics such as PU and NBR.
Non-ferrous metal is present in small quantities only.
Electrical components (if used during operation) such as the motor and electronic switches must be disposed of according to the local regulations
in force.
Crushing hazard due to unexpected movements
This could result in sever injuries or damage to property
Bring system to a standstill and secure.
Caution
38
WWW.PARKERMOTION.COM
PH: (724)-861-8200
Advertisement
Table of Contents
