Motor And Gearbox Mounting - Parker HMR Series Assembly And Operating Instructions Manual

HMR Series Positioners
7.7

Motor and Gearbox Mounting

Overview / exploded view of motor installation with a flange plate, using a toothed belt as an example.
Motor
Overview / exploded view of gearbox installation with two flange plates, using a spindle drive as an example.
Gearbox
Motor
Motor coupling
Motor flange
Motor coupling
Motor flange
The motor flange usually consists of on flange plate. If the geometric requirements are
unfavorable in the assembly, the motor flange can consist of two flange plates.
The motor flange designation always remains the same and does not depend on
whether a motor or a gearbox with motor is to be installed on the linear drive.
Coupling housing
Coupling housing
NOTE
26
Drive shaft
WWW.PARKERMOTION.COM
PH: (724)-861-8200