Circuit Card Grid - Nortel Meridian 1 Installation Manual

Page 32 of 74 Option settings
Figure 3

Circuit card grid

553-3001-211 Standard 17.00 April 2000
On a circuit card
• ON may be indicated by the word "on," the word "up," the word
"closed," the number "1," an arrow pointing up, or a solid dot (•).
• OFF may be indicated by the word "down," the word "open," the number
"0," or an arrow pointing down.
Throughout this document, if neither ON nor OFF is given (there is a blank
space) for a position on a switch, that position may be set to either ON or OFF
because it has no function for the option described.
ON
S4
(switch 4
at coordinate
B11)
Positions
1 2 3 4 5 6 7 8 9 10
ON
S8
(switch 8
at coordinate
F30)
553-5491