Nortel Meridian 1 Installation Manual page 24

Page 24 of 74 Acceptance tests
553-3001-211 Standard 17.00 April 2000
Procedure 4
Line cards
Use this procedure to test a line card.
1 Log into the system:
LOGI (password)
2 Perform a network memory test, continuity test, and signaling test on
a specific loop and shelf:
LD 30
SHLF l sloop and shelf numbers
If the system response is other than OK, see the X11 Administration
(553-3001-311) to analyze the messages.
3 For a line card on a superloop, perform a signaling test on a specific
card or unit:
UNTT l s cloop, shelf, and card numbers
For the NT8D02 Digital Line Card, enter:
UNTT l s c uloop, shelf, card, and unit numbers
If the system response is other than OK, see the X11 Administration
(553-3001-311) to analyze the messages.
4 End the session in LD 30:
****