Nortel Meridian 1 Installation Manual page 16

Page 16 of 74 Circuit card installation
Figure 2
Installing the circuit card in the card cage
Card locking
device
Tab
Latch post
553-3001-211 Standard 17.00 April 2000
5 If there are option switches or jumpers on the card, set them according
to the work order (see "Option settings" on page 31).
Incorrectly set switches on common equipment circuit cards may
cause a system failure.
6 Squeeze the ends of the locking devices on the card and pull the tabs
away from the latch posts and faceplate (see Figure 2).
CAUTION
Edge of
card cage
Card
guides
553-5002