Weider 831.159530 User Manual page 22

59. Attach the Curl Pad (36) to the Curl Post (35) with
two 1/4" x 3/4" Bolts (90).
60. Make sure that all parts have been properly tightened before using the weight system. The use of the
remaining parts will be explained in ADJUSTMENTS, beginning on page 23 of this manual.
Before using the weight system, pull each cable a few times to make sure that the cables move smoothly
over the pulleys. If one of the cables does not move smoothly, find and correct the problem. Refer to the
CABLE DIAGRAMS on page 26 for correct cable routing. IMPORTANT: If the cables are not properly
installed, they may be damaged when heavy weight is used. If there is any slack in the cables, you
will need to remove the slack by tightening the cables. See TROUBLE-SHOOTING AND MAINTE-
NANCE on page 27.
59
22
36
90
90
35