Weider 831.159530 User Manual page 16

37. Wrap the Butterfly Cable (81) around a "V"-Pulley
(38). Attach the Pulley and a Long Cable Trap
(50) to the indicated side of the bracket on the
Butterfly Upright (4) with a 3/8" x 2 1/2" Bolt (78)
and a 3/8" Nylon Locknut (74). Be sure the Long
Cable Trap is turned to hold the Cable in the
groove of the Pulley.
38. Remove the two 3 1/2" Pulleys (37) and two
Cable Traps (44) from the set of Pulley Plates
(43). Wrap the Butterfly Cable (81) around the
Pulley. Reattach a Pulley and a Cable Trap to the
top set of holes in the Pulley Plates with a 3/8" x
2" Bolt (79) and a 3/8" Nylon Locknut (74). Be
sure the Cable Trap is turned to hold the
Cable in the groove of the Pulley.
39. Wrap the Butterfly Cable (81) around a "V"-Pulley
(38). Attach the Pulley and a Long Cable Trap
(50) to the other side of the bracket on the
Butterfly Upright (4) with a 3/8" x 2 1/2" Bolt (78)
and a 3/8" Nylon Locknut (74). Be sure the Long
Cable Trap is turned to hold the Cable in the
groove of the Pulley.
40. Secure a 3/8" x 1" Bolt (97) to the bracket on the
Right Butterfly Arm (18) with a 3/8" Nylon Jamnut
(88). Attach the end of the Butterfly Cable (81) to
the Bolt with another 3/8" Nylon Jamnut. Do not
tighten the second Nylon Jamnut; the Cable
must be able to pivot freely.
37
4
38
39
78
81
74
40
Bracket
88
16
38
50
78
81
Bracket
74
81
37
74
44
79
43
38
50
4
97
81
18