49. Wrap the Leg Press Cable (82) around a 3 1/2"
Pulley (37). Attach the Pulley and a Cable Trap
(44) to the Butterfly Upright (4) with a 3/8" x 5"
Bolt (61) and a 3/8" Nylon Locknut (74). Do not
tighten the Nylon Locknut yet. Be sure that
the Cable Trap is turned to hold the Cable in
the groove of the Pulley.
50. Wrap the Leg Press Cable (82) around the 3 1/2"
Pulley (37) removed in step 42. Attach the Pulley
to the bottom of the Double U-bracket (42) with
the 3/8" x 2" Bolt (79) and the 3/8" Nylon Locknut
(74).
51. Wrap the Leg Press Cable (82) around a 3 1/2"
Pulley (37). Attach the Pulley and a Cable Trap
(44) to the 3/8" x 5" Bolt (61) in the Butterfly
Upright (4) with a 3/8" Nylon Locknut (74). Be
sure that the Cable Trap is turned to hold the
Cable in the groove of the Pulley.
52. Attach the end of the Leg Press Cable (82) to the
Leg Lever (8) with a 5/16" x 2 1/2" Bolt (61), two
5/16" Washers (66), and a 5/16" Nylon Jamnut
(105). Do not overtighten the Nylon Jamnut;
the Cable must be able to pivot freely.
49
50
79
51
52
8
105
66
19
61
37
82
44
74
4
74
42
37
82
4
61
44
37
66
82
63
82
74