25. Wrap the Press Cable (80) around a "V"-Pulley
(38). Attach the Pulley to the Press Upright (6)
with a 3/8" x 3 3/4" Bolt (62), a 3/8" Washer (75),
and a 3/8" Nylon Locknut (74).
26. Wrap the Press Cable (80) around a 3 1/2" Pulley
(37). Attach the Pulley to the other side of the
Press Frame (14) with a 3/8" x 3 1/2" Bolt (65), a
3/8" Washer (75), and a 3/8" Nylon Locknut (74).
27. Wrap the Press Cable (80) around a 3 1/2" Pulley
(37). Attach the Pulley and a Cable Trap (44) to
the Press Upright (6) with a 3/8" x 3 3/4" Bolt
(62), a 3/8" Washer (75), and a 3/8" Nylon
Locknut (74). Make sure the Cable Trap is
turned to hold the Cable in the groove of the
Pulley.
28. Wrap the Press Cable (80) around a 3 1/2" Pulley
(37). Attach the Pulley and a Cable Trap (44) to
the bottom of the Press Upright (6) with a 3/8" x
3 3/4" Bolt (62), a 3/8" Washer (75), and a 3/8"
Nylon Locknut (74). Make sure the Cable Trap
is turned to hold the Cable in the groove of
the Pulley.
25
26
65
75
80
37
27
28
74
37
80
13
62
38
80
6
75
74
14
74
74
37
44
80
75
62
6
6
44
62
75