o.
battery
5.
Follow the procedure in
Display assembly
Removing the display assembly
1.
Follow the procedure in
2.
Remove the:
a.
battery
b.
base cover
c.
GPU module
d.
heat sink
3.
To disconnect the cables:
a. Unroute the display cables and antenna cables from the routing channels .
b. Disconnect the antenna cables from the modules.
c. Remove the screws that secure the display connector cable cover to the system board [1].
d. Disconnect the display connector cable from the system board [2, 3].
e. Remove the screws to remove the hinge covers [4].
f. Lift the hinge covers and remove them to expose the display cable routing and the display hinges
[5].
58
After working inside your
Before working inside your
computer.
computer.